Choose the Effective Hydraulic Oil Seal

INTRODUCTION

Hydraulic oil seals are mechanical seals also known as a metric oil seal and functions with hydraulic oil. They are usually produced for equipment that faces constant frequent exposure with oil. Oil seal manufacturers use materials such as polyacrylate, silicone, Teflon, or rubber to engineer them for use in industrial equipment for various industries such as heavy duty machinery, electrical power systems, construction, telecommunications, etc. The hydraulic oil seals not only prevents leaks from occurring but they are also designed to retain fluids, if required. 

HYDRAULIC OIL SEAL

·Oil seals (oil resistance) for hydraulic pumps

Applications: metallurgy machinery, automobiles, home appliances, electrical power systems, textile, construction, telecommunications, military

Materials: Multi-type of rubbers, Silicone, Ethylene Durable, custom sizes, 

·Rotary hydraulic oil seals

Applications: Crankshaft, excavator, hydraulic loader, bulldozer, buses, trailers, automobiles, pneumatic and fluid systems, water media ceiling

Materials: rubber, viton, PU, Oil resistant, heat resistant, corrosion resistant, abrasion and aging resistant, insulation, acid and alkaline resistant, airtight, shock absorption, stable during high speed rotation.

·Hydraulic seals for gear pumps

Applications: For valve or pump sealing

Materials: Teflon (polytetrafluoroethylene) Resistant to all chemicals and solvents, maintains high leak tightness, non-toxic, heat resistant, oil resistant, acid and alkali resistant, wear resistant, aging resistant, shock absorption.

·Oil seals – double lip

Applications: Mechanical equipment, automotive, construction, home appliance, aviation.

Materials: NBR, Silicone, HNBR Durable, water resistant, oil resistant, pressure resistant, injection, extrusion, excellent sealing and damping. 

·Oil seals for cylinder shaft

Applications: Truck, transmissions, fluid systems, hydraulic systems, pneumatic systems, automobile, motorcycle, industry, agricultural machinery, truck, buses, trailers, exercise equipment, water media sealing

Materials: NBR, Silicone Resistant to all chemicals and solvents, maintains high leak tightness, non-toxic, heat resistant, oil resistant, acid and alkali resistant, wear resistant, aging resistant, shock absorption.

INSTALLATION PRECAUTIONS

In order to obtain optimum product performance, hydraulic oil seal manufacturers advise clients to following strict handling and storage precautions. Avoid damage or deterioration to the oil seals by following correct installation procedures. 

HANDLING PRECAUTIONS

·Housing parts must be flushed to secure cleanliness

·Refrain from using fuel oil, such as gasoline, kerosene or solvents for flushing. Wipe off liquids completely prior to installation in order to avoid making contact with packing.

·Mask the dust seals, especially the exposed lip part, so that the wet coating does not make contact with the dust seals

·Apply lubricating oil for the machinery and grease the packing and housing for easy installation.

·Ensure to use a protective cover on the rod, threaded part to avoid contact with delicate lip of the packing

·Tools should be chamfered to stay away from sharp edges 

·Make certain that the sealing direction is correct and install packing correctly

INSTALLATION PROCEDURES

·Installing the packing

-On the piston hook one side on the groove and push the packing by extending the rubber to the other side

-Deform the rod packing to slide one side onto the groove. Then insert the whole part from the opposite side by pushing the packing with your finger. To install small packing onto a groove it is preferred to use a jig.

·Installing the seals

-Insert a back ring (O-ring and square ring) first, then hook one side of the seal ring on the groove and push the opposite side from the taper side.

·PG Rings

-For a piston, hook one side of the ring and push the opposite side onto the groove.

-For a rod, deform a ring into the shape, insert one side then push the whole part by holding the ring with your finger

·SMJ-Seals

-Insert a black ring (the O-ring made of rubber) first, then deform the seal ring into the shape. Insert one side and then push the whole part by holding the ring with your finger. The seal ring shows the correct direction to be inserted. Try not to cause deformation of the seal ring when installing.

·Rotating joints

When installing this seal, the procedures to follow are: 

-Install the back ring (i.e. the square ring made of rubber) in only the seal groove that is located at the bottom

-Move the seal ring downwards through the seal grooves and the port grooves

-Hook one side of the seal ring in the groove and push to the opposite side quickly

-When installing seal rings to the second groove repeat the procedure.

MATERIAL CERTIFICATION DATA SHEETS

Hydraulic oil seal manufacturers should supply MSDS certificates for all products purchased by customers as a standard. These certificates protect the customer in the event of any defect or operational errors.