DMS Seal Manufacturer different types of roller bearings guide strip as the guide sleeve

Company Advantages
1. Stressing the importance of design of different types of roller bearings turns out to be a right way.
2. DMS Seal Manufacturer different types of roller bearings is made from durable raw materials with good properties.
3. Dms Seals Technology Co.,limited highly values the importance of material and choose top material of .
4. different types of roller bearings pursues best performance and perfect design.
5. DMS Seal Manufacturer is made by adopting the world's newest production technology.
6. The product features safety in use. Controlled by an advanced circuit, it has the over-loading protection function in each main process.
7. The product is not inclined to break down suddenly when the voltage goes down. It is designed with an undervoltage protection system, namely, a voltage relay. The voltage relay works under low voltage to keep the product run smoothly and safely.
8. This product is not vulnerable to get pilling. The softening agents are used in the fibers to reduce the possibility of pilling caused by rubbing, repeated stretching and relaxation.
9. The product not only plays an important role in sealing medium but also it can keep the contaminants from polluting the medium.
10. If any complaints for our different types of roller bearings , we will deal with it immediately.
11. Dms Seals Technology Co.,limited seeks continuous improvement to attain a high standard of service.
12. As a dominant different types of roller bearings supplier, DMS Seal Manufacturer focus on its customer service.
13. Outer packing for different types of roller bearings will be very solid, including bubble pack, stretch films and wood frame or wood box.

1. Installation Recommendation 

2. Application and properties

Applicable to the guiding of piston and piston rod of hydraulic cylinder and air cylinder, has the function of supporting and guiding. The guide strips with the thickness which equal to or greater than 2mm, double sided embossing could be provided, the embossing structure is conducive to the formation of lubrication micro-pit, improve micro lubrication, at the same time, it is helpful to embed tiny foreign objects and protect the sealing system.

 

3. Standard materials

Filled PTFE

 

4. Working Conditions

Working  Conditions
Diameter Range	Pressure Range	Temperature Range	Speed	Medium
Custom as Required	—	-55℃ +225℃	15 m/s	hydraulic oil, emulsion, and water

Piston:  L=C × ( D - W ) - k [ mm ] D = Piston Dia. [ mm ] W = Thickness [ mm ]

Rod:    L=C × ( d + W ) - k [ mm ] d = Rod Dia. [ mm ]  C = 3.14  k=0.8

 

5. Length of whole roll

Thickness	1	1.5	2	2.5	3	4	5	6
Length of whole roll ( m )	55	35	27	22	18	13	10	8

Above data only for reference, it shall follow the actual products.

Standard groove width

Groove width L2

2.5

3.2

4

4.2

5.6

6

6.3

8.1

9.7

10

12

15

18

20

25

30

40

50

The products of various width could be provided.

Standard thickness of product

Thickness W

1

1.5

1.55

2

2.5

3

4

5

6

The products of various thickness could be provided.

Company Features
1. Dms Seals Technology Co.,limited is widely recognized by customers domestically and internationally. Dms Seals Technology Co.,limited has been focused on producing high-end since its inception. Supported by our trustworthy customers, DMS Seal Manufacturer has gained more reputation in different types of roller bearings market.
2. We supply small needle bearings in compliance with customized designs by material of and . Strong strength and advanced machine ensure DMS Seal Manufacturer to develop better and higher quality shaft oil seals . Thanks to its technology, the quality of bearing for roller strides. Dms Seals Technology Co.,limited has accelerated the construction of technology in production of Dms Seals Technology Co.,limited.
3. The DMS Seal Manufacturer brand is now committed to improving the quality of its services. Contact us! Dms Seals Technology Co.,limited is always working hard, just for customers' needs. Contact us! Dms Seals Technology Co.,limited wants to be one of the leading long roller bearing provider in this field. Contact us! DMS Seal Manufacturer will ensure that our customers get the best work through new ideas. Contact us!

DMS Seal Manufacturer different types of roller bearings guide strip as the guide sleeve

different types of roller bearings

Type: