DMS Seal Manufacturer oil seal spring manufacturers for aviation

Company Advantages
1. DMS Seal Manufacturer is strictly designed by our pre-press department which is equipped with the most modern design software such as CAD software.
2. The manufacture of DMS Seal Manufacturer oil seal spring has been finely controlled. The amounts of raw materials are calculated by the computer to achieve accuracy.
3. In the design of DMS Seal Manufacturer , there are some steps involved, including assessment of water quality, desired treated water quality, selection of the treatment process, and system design.
4. The product is able to withstand strong wind power. Adopting the bar tensioning system, it has a more stable structure.
5. The product has enough tensile strength. It has the maximum force that it is able to withstand without fracturing when stretched.
6. The product is anti-rust. It is composed of aluminum structures and galvanized steels which can ensure it always shows perfect gloss.
7. The product is safe for long-term use. Its non-toxic stainless steel parts can withstand the heat generated from barbeque without releasing any harmful substances.
8. Except reliable quality assurance, high-quality after-sales service is also important in DMS Seal Manufacturer.
9. Dms Seals Technology Co.,limited has strong technical expertise and has a unchanged commitment to elaborate manufacture and constant innovation.
10. The higher sales of oil seal spring also indicates the importance of considerate service.

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.

2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316

3. Working Conditions

Working  Conditions
Diameter Range	Pressure Range	Temperature Range ℃	Speed	Medium
3 - 1600mm	0 - 20MPa	-200 ~ +250	5 m/s	High and low temperature oil and water and other fluids.

4. Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

Rod Diameter	Groove Width	Groove Diameter	Radial Clearance
d	L	D	e
2 ~ 10	2.5	d+3.0	0.05
10 ~ 22	3.2	d+4.0	0.065
22 ~ 52	4.7	d+6.0	0.075
48 ~ 150	7.5	d+10.0	0.09
150 ~ 400	11.0	d+15.0	0.10

5. Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Ⅲ，Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.

Company Features
1. Since the creation, Dms Seals Technology Co.,limited has been specializing in the production of in China. We are now considered as one of the leaders in the industry. As a professional manufacturer and supplier, Dms Seals Technology Co.,limited has grown in a rapid way than most other competitors in the China market. Years have passed since the first product was launched by Dms Seals Technology Co.,limited. Now we are a mature manufacturer of best selling oil seal spring. Backed by years of extensive experience, Dms Seals Technology Co.,limited has been developed into a reliable and powerful manufacturer and supplier of .
2. Staff working in Dms Seals Technology Co.,limited are all well-trained. Different mechanisms are provided for fabricating different spring loaded seal . All our technician in Dms Seals Technology Co.,limited are well trained to help customers solve problems for spring energized seals .
3. Dms Seals Technology Co.,limited sincerely invite you to visit our factory any time. Get an offer! Dms Seals Technology Co.,limited sticks to the development road of . Get an offer! For the consistent development of DMS Seal Manufacturer, our oil seal manufacturer must be produced adapting to the trend of information. Get an offer! DMS Seal Manufacturer follows the enterprise concept of . Get an offer! Dms Seals Technology Co.,limited aims to be world-class spring energized seals company. Get an offer!

DMS Seal Manufacturer oil seal spring manufacturers for aviation

oil seal spring

Type: