DMS Seals Top high pressure seal design Suppliers for reciprocating piston rod or piston single acting seal

Company Advantages
1. As our workers conduct manufacturing by using the latest technologies, DMS Seals high pressure seal design is exquisite in every detail.
2. The whole production of DMS Seals high pressure seal design is strictly supervised by professionals who have extensive experience in the industry.
3. The design of DMS Seals high pressure seal design is completed by our famous designers with innovation in minds.
4. The professional production team ensures the accurate production of DMS Seals .
5. In order to eliminate the possibility of all defects, the product needs to be thoroughly inspected by a professional quality inspector.
6. The product has the characteristics of long service, excellent performance and stable performance.
7. Our professional and responsible quality control team ensures that products meet industry standards.
8. As long as there is need, Dms Seals Technology Co.,limited will be ready to help our customers to solve any problems happened to high pressure seal design .
9. is perceived as with high commercial value.
10. Dms Seals Technology Co.,limited has realized high standardized governance, high management efficiency, high degree of marketization and strong operating capabilities.
11. Dms Seals Technology Co.,limited's manufaction line follows a strictly uniform standard.
12. We are a leading enterprise which is dedicated to supplying all kinds of high pressure seal design and other medical equipment.

1. Application and properties

Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.

Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.

The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.

The working temperature range is wide, and can be used for -200 ℃ to +250 ℃.

It can be used for very high speed, very low speed, micro-stroke and other special conditions.

Suitable for aviation, military and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.

It can be used in rotary sealing. It can adapt to large eccentricity and beating.

2. Standard materials

Sealing sleeve: PTFE

Spring: Stainless steel 304, 316

3. Working Conditions

Working  Conditions
Diameter Range	Pressure Range	Temperature Range ℃	Speed	Medium
3 - 1600mm	0 - 20MPa	-200 ~ +250	5 m/s	High and low temperature oil and water and other fluids.

4. Installation Sizes

Back pressure surfaceR1=0.1 ~ 0.2, tank bottom R2=0.3 ~ 0.5, Import lengthC=(0.7 ~ 1.0)L.

Rod Diameter	Groove Width	Groove Diameter	Radial Clearance
d	L	D	e
2 ~ 10	2.5	d+3.0	0.05
10 ~ 22	3.2	d+4.0	0.065
22 ~ 52	4.7	d+6.0	0.075
48 ~ 150	7.5	d+10.0	0.09
150 ~ 400	11.0	d+15.0	0.10

5. Matters needing attention  

Ⅰ, The installation groove must be open or semi open, and it is recommended to be open.

Ⅱ, If the seal is for the rotating shaft, it is recommended that the surface hardness of the shaft should be no less than HRC40.

Ⅲ，Considering the adaptability of the working medium, the adaptability of the jacket and spring should be taken into account.

Ⅳ, It is better to install an anti fouling ring or a antifouling guide ring in the notch direction in front of the seal.

 

Company Features
1. Dms Seals Technology Co.,limited is a internationally famous manufacturer of high pressure seal design with high quality. Dms Seals Technology Co.,limited now leads the development of mechanical seal sleeve industry. As a leading company, Dms Seals Technology Co.,limited mainly manufactures high quality loaded lip seal . Especially in springseal inc manufacture, Dms Seals Technology Co.,limited is in the leading position in the domestic industry.
2. We have a group of experienced production technicians. Over the years, they have carried out numerous successful projects for customers. They are keen at finding out the most cost-effective manufacturing ways. We have a team of the project management team. The team members have abilities in various fields, such as project planning, quality assurance, quality control, performance review, and budget planning. All these abilities are crucial for providing professional products for customers. We stand out for our professional and experienced manufacturing team. They are able to ensure that each product is carried out with the best fit, form, and function.
3. DMS Seals devotes ourselves into manufacturing rotating mechanical seal with favored price with our dedication. Inquire now! Diversified operations, intensified growth and continuous expansion of mechanical seals online business is Dms Seals Technology Co.,limited's strategic principle. Inquire now! Customers service in Dms Seals Technology Co.,limited is just second to quality. Inquire now! Dms Seals Technology Co.,limited will keep tracked customers' feedback for using pusher mechanical seal . Inquire now! DMS Seals was born with the belief of . Inquire now!

DMS Seals Top high pressure seal design Suppliers for reciprocating piston rod or piston single acting seal

high pressure seal design

Type: