How to do a good job of storage of silicone waterproof ring?

How to do a good job of storage of silicone waterproof ring?

Do you know how to do a good job of storing the silicone waterproof ring? Let the staff of the silicone waterproof ring manufacturer give you a brief introduction, I hope it can be helpful to you.

1. The storage temperature of the silicone waterproof ring should be lower than 25°C, preferably lower than 15°C. When the temperature exceeds 25°C, certain forms of damage may accelerate, thereby shortening the shelf life. Temperature is too low,

The silicone waterproof ring will harden. Beware of permanent deformation and damage such as squeezing, bending, and brittle cracking during storage. Therefore, the storage temperature cannot be lower than -15℃. When the silicone waterproof ring is taken out from the low temperature and used,

Use it when the temperature is raised to 30℃.

2. When storing the silicone waterproof ring, avoid moisture, and the average humidity should not exceed 65%. There should be no condensate on any kind of silicone waterproof ring.

3. The silicone waterproof ring avoids light, especially strong light with high ultraviolet content. The silicone waterproof ring can be stored in a sealed polyethylene plastic bag and stored in a cool and ventilated place. Packing should not be made of polyvinyl chloride materials.

4. The silicone waterproof ring should be stored separately. Different rubber materials are packaged separately, and the sealing rings of different specifications are placed flat. Pay attention to the distribution and use in the order of manufacturing,

So as not to exceed the expiration date of the inventory. The silicone waterproof ring should be placed in a wide place to avoid stretching, compression, twisting or other forces. Do not stack or hang the silicone waterproof ring to avoid permanent deformation.

5. During the storage of the silicone waterproof ring, it is not allowed to come in contact with solvents, oils, grease and other semi-solid materials.

It is also not allowed to come into contact with metal or non-metal materials that may cause qualitative change effects, such as copper, copper alloys, manganese, iron, and some woods that are easy to secrete resin.

6. The shape and size of the silicone waterproof ring and the performance of the rubber material should be checked before the silicone waterproof ring has been stored for a period of time. Those that fail to meet the requirements shall not be used.

7. The silicone waterproof ring stored in the package can be washed with soapy water or methanol denatured alcohol when used, and dried at room temperature. Do not soak in gasoline, do not bake it on a heat source or blow it dry with a fan.

The above is about how to store the silicone waterproof ring. If there is anything you don’t know, you can directly communicate with our customer service. We will serve you wholeheartedly and thank you for watching.

The average consumer is always looking for ways to save money while finding out solutions, is designed for killing two birds with one stone, providing a perfect solution to seal manufacturers problems.

If you are looking for rubber o rings manufacturers seal manufacturers, we have plenty of them in our store. We have rubber seal ring manufacturers and many others. Visit DMS Seals to know more.

Long gone are those days when rubber o rings manufacturers were used to rubber seal ring manufacturers. Now new like rubber o rings manufacturers seal manufacturers have come up.