liquid temperature-control equipment.

Superior Engineering Co. , Ltd. Fluid-
Circulating heat transfer equipment for molding, extrusion, Thermoforming and other plastic processes includes portable coolers and central systems in the factory range.
1-portable chillerto 30-
Tons of capacitance in air-and water-
Concentrated design.
Central chillers in 10 to 500 tons of air-and water-
Concentration of outdoor and indoor systems.
WMC series Water
Refrigeration central chiller (120 to 180 tons)
Energy Corporation of America
Magnetic non-friction centrifugal compressor is saved. Water-and oil-
Cycle mold
Temperature Controller.
The unit operates between 30f and 250 F.
The oil unit operates between 100 F and 500 F. Cooling-
From the 20-tower systemto 1000-ton capacity.
Fiberglass and metal tower cells. Open-and closed-
Standard loop design.
Engineering services including central cooling systems.
The device can be a computer.
For remote control, information collection, and data storage. Oil-
Free, non-friction, water
Refrigeration central chiller (60-80 cons)
Based on the Danfoss turbocharged compressor.
The equipment is said to be very quiet and poorly maintained. AEC, INC.
Water temperature-temperature
Control Unit of 0. 75-to 10-
Standard stainless steel-hp pump
Steel sheath heater selection from 9 to 24kw. Off-the-
Shelf microprocessor easy to controlto-
Dual Display for reading LED, set point and process temperature, optional SPI communication protocol and full
Has a graphical display panel. Low-
Outline cables designed for stacking and easy maintenance.
Standard options include vacuum flow negative/positive pressure units, system water purification, regulating cooling valves, and closing-
Circulating heat exchanger. Portable air-and water-
Cold fan from 0. 5 to 40 tons. Ultra-
Compact PS air series-and water-
2 tons of cooling chillerthe-
Shelf fuzzy logic microprocessor control, rolling compressor and brazing-
Plate Evaporator
The R Series central chiller uses a semi-sealed rolling compressor of 30 to 100 tons
Seal screw compressor from 54 tons to 195 tons.
All rolling compressors and screw compressors up to 75 tons are equipped with stainless steelsteel brazed-
Plate Evaporator andutilize R-134 refrigerant.
A rolling compressor cooler can be configured either with a complete pump box or independently.
RTCW non-friction cooler uses new magnetic bearings that provide quiet, energy
Save operating costs of 120 to 190 tons.
Air supplied by BFC series air coolers-
Ring cooling at constant temperature, pressure and volume.
Up to 5000 cfm is available. Cooling-
Tower system hydraulic system for condenser and forming machine
Induction of ventilation and fiberglass
Draft models from 50 tons to 200 tons.
Affinity industryCompact, high-
Capacity cooler with standard remote control.
Implementation from 3000 to 156,000 Btu/hr [+ or -]1[degrees]
F stability and access to all components are not restricted.
Non-colored coolant loopflow and low-
Liquid Level Alarm, hot-
Gas bypass with long, high/low compressor life
Temperature alarm, high
Capacity heat exchanger for high temperature
Transmission efficiency. Digital-readout (C/F)
The microprocessor is programmable and automatically tuned.
Alpha marathon Technology Co. , Ltd. Portable, self-contained air-
Cooling Device for film blowing production.
The capacity is from 500 to 1500 cfm and the device can be added to any existing air ring to improve bubble cooling. Large-
The Surfacecooling coil cools the air.
The propeller drives bearings with permanent lubrication.
Customized design is available.
AMCOT cooling tower Co. , Ltd.
Reverse flow and side flow induced draft fan-
Glass fiber to build cooling tower with galvanized or stainless steel
Stainless steel assembly options and standard stainless steelSteel fasteners.
The counter flow unit is a bottle-
Regardless of the location, air flow can be maximized.
The design also minimizes fanhp, allowing for smaller-
Motor size, less power consumption.
The units range from 5 tons to 1500 tons with modular features that save space and simplify expansion of cooling towers.
Options, upgrades, and accessories are available.
American thermal company. Roll-
High usage of heating and cooling control system
Temperature of water and heat
Transfer oil at temperatures from 200 to 700 degrees F.
Heat sources include steam, electric heaters, and fuel-fired heaters.
ARCTICHILL chiller and modular freezing-
Water system range from 1-to 60-
Indoor and outdoor air is availableand water-cooled models.
Options include on, off, vertical, and horizontal systems.
Cooling tower from 5-sizeto 1000-
Tons of capacity is built through FRP materials of PVC filler and pipe.
Dedicated to the development of complete systems.
The joint venture of the Auxiliary Systems group of Novatec and Advantage engineering company is bothprocess-
Drying and materials for cooling products and Novatec-
Handling equipment.
Baltimore AirlinesEvaporative-
Cooling equipment includes cooling towers in cross flow and counter flow
Flow configuration with factory-
The modular unit assembled reaches 2110 tons/32 million Btu/hour.
Closed steamer condenser
Heat exchanger, heat exchanger, ring cooling tower
Storage units and microbial control are also available. Factory-
Assembly equipment available in heat
Galvanized steel, galvanized steel with polymer protective coating, fiberglass or stainless steel.
Shell heat exchanger-and-
Tube configuration.
Microbial control the use of iodine to control the growth of bacteria, mucus and algae. ISO-9000 certified.
Berg cooling systems
Cooling equipment includes half
Air-tight drive or screw compressor; air-
Cooling Device with heat recovery; water-
Cooling device with \"free cooling; clean-
Water traction system;
Pre-packaging mezzanine system;
Portable chillerblown-filmcoolers; temperature-control units; chemical-
Treatment Package; mold-
Area dehumidifier; and water-
Filter system.
Glass fiber tower with low corrosion
Hp motor and construction-steel bases. Custom-
Portable equipment, central equipment, pumping system, temperature controller and tower for construction works.
Burger & Brown Engineering Co. , Ltd. Mold-
The temperature regulator controls the mold temperature by throttling or allowing the flow of water to pass through the mold, without using electricity, controlling the water temperature through the mold between 80 F and 120, the connection size is 1/2-in. NPT(F)outlet and 1/4-in. NPT(F)inlet.
A differential pressure of 10 psi is required.
Cooling of aluminum or stainless steel-
The water pipe delivers the water to the mold to control the temperature. Sizes from 0. 75 to 2.
From 1/8-provide any number of portsthrough 1-in. NPT(F)
And integrated mounting holes.
The aluminum manifold is colored.
Coding for line function identification.
The red manifold indicates the return water line and the blue emanifolds that supply the water.
The mechanical flowmeter with pressure and thermometer provides diagnostic information in size from 1/4-to 3-in. NPT(F)and 1.
Gal/min 5 to 150. Dual-
Scale temperature/pressure measurements exceed the maximum operating specifications of the flowmeter 240 F and 100 psi.
CIMCO Refrigeration Division.
Toronto Industries Limited
Supply custom chiller, refrigeration-
Pump-tower system
Tank System, case-and-
Tube heat exchanger and condenser.
CITO products
Pulse mold monitor
Cooling temperature-
Control system byor multiple-
Area Controller, thermal sensor and solenoid valve.
The unit divides the mold into zones according to the geometry of the mold and the distribution of the heat load.
It placed a high
A thermal resistor sensor with a resolution of less than 0. 100 to 0. 500 in.
When the plastic enters the mold, the temperature on the surface of the part increases.
The microprocessor of the unit uses this information to start and stop the cold water burst immediately after the mold is filled.
The water pulse generated by the melt causes the temperature of the cavity in or near Arthur Mister to exceed the threshold of the molded plastic type.
The timing of the pulse is based on the amount of BTUs removed from the part.
The cooling pulse will never be suppressed.
If more or less cooling is required, the MoldMonitor adjusts the length of the cooling pulse.
COLORTRONIC North America
The company offers a full range of process heating and cooling equipment from water and oil temperature to temperature
Freeze control unit for custom designand tower-water systems.
COMET Automation Systems Co. , Ltd.
The company provides liquid circulation temperature-
Control Products: CW series
Water temperature controller (up to 356 F), CO serieshot-oil units (to 356 F)
, CWO series water or oil unit (
194 F with water, 302 F with oil)
And CV Series water or oil units (
194 F with water, 302 F with oil)
Working under pressure or suction (leak-stop)mode.
There is corrosion.
Escape the bronze pump made in Speck, Germany.
News Center-
Side temperature control, economical hot water-
The temperature controller has two-
Eliminate up to 40 leaking workpiece castings-prone fittings.
Individual units availableor dual-
Area configuration for direct injection, closed-or isolated-
Circuit processing and cooling. Pumps to 7.
5 horsepower, heater to 48kw, processing temperature to 250 degrees F.
Microprocessor control includes a new generation of low
Cost TW control combined with temperature function-
Indicates the control (TIC)with many user-
Friendly features of programmable logic controllers (PLC)
Usually only available in more expensive units.
All units covered by threeyear warranty. A specialhigh-pressure, low-
Flow version of heat answering machine TCU for optical storage media mold (CDs and DVDs)Corrosion-
Packaging-resistant options are available to minimize or eliminate rust in process water.
Crude oil temperature-
Control unit with pump from 1 to 3 hp formal temperature to 500 E vacuum positive and negative pressure unit with pump from 2 to 7. 5 hp.
New EcoSmart ECA series air
Cooling and ECW series water-
Cooledchillers is a portable packaging device for stable temperature control in the machine
Side application.
Designed to use eco-friendly R-
410A refrigerant with air-and water-
Cooling mode can be in multiple three
Phase voltage from 1. 5 to 30 tons.
Can also be with R-
Frigerant Refrigerant and single-
Phase power 1/2-and3/4-ton models.
Standard features include fin-and-
Tube Condenser with vertical air discharge on aircooled units; brazed-
Use plate condenser in larger water
Cooled chillers and tubesin-
A smaller pipe. cooledunits; brazed-
Plate Evaporator;
All three-on-rolling compressorsphase models.
A basic microprocessor
The control based on the setting point and actual temperature of the LED display plus the status of the components and diagnosis is standard.
Optional enhanced control features add-on diagnostic features, as well as multiple options to communicate with a moldingmachine or supervisory control pack, such as the company\'s control works platform.
Central Water system includes outdoor air
20-cooling chillerto527-
Capacity and single ton, dual-, and multiple-
Compressor design and indoor water
Cooling cooler from 23 tons to 481 tons. Pump-
Optional high tank assembly
Terminal PLC/touch panel control includes 180-to 1100-
PE cans or epoxy-
Stainless steel or stainless steel
Steel reservoirs from 1525 to 5010 gal and larger custom designs as needed.
Pump from 2 to 100 horsepower and bigger if needed.
The rotary formed polyethylene cooling tower now has four series ranging in capacity from 10 tons to 800 tons.
Tower isolation board-and-
Frame heat exchanger, filter/filter and sand filter system around centerSystem provided.
Water-Continental Engineering System
Including industrial open refrigeration systems
Use a compressor to drive the chiller to eliminate burning of the motor, costly cleaning or extended downtime; energy-
Efficiency ratio of 16 or more; built-
Capacity control in response to suction pressure;
Uninstalling start. Extra-
Quiet models and explosionsproof options. Portable air-
The Chiller has high-
Sealing or semi-sealing efficiency
Fully enclosed compressor, fully insulated cooler, air-
Cooling condenser, insulated reservoir, solid-
State temperature controller with built-in readingin freeze-
Function lamp, pressure gauge, operation and safety control.
Custom options include12, or explosion
Automatic alarm system, automatic alarm system
Gas bypass, capacity control or energy-saver, two-
Low speed capacity modulator, Double Pump, heat recovery, low ethylene glycol
Temperature unit, frozen-
Water flow switch. Non-
There are refrigerants that consume ozone.
Cooling Technology CompanyAir-and water-
Temperature-cooling chiller
Cooling-control unit
Tower system and central turnkey system. Mini-
The portable chiller is 1 ton to 12 tons and adopts rolling compressor technology.
Compact portable devices range from 10 tons to 50 tons.
Both sides have colored chilled water circuits.
You can also provide more than 20 to 300 tons of multi-link units, screws-
Compressor cooling unit of 50 tons to 300 tons or more
Tower system from 10 tons to more than 400 tons.
Temperature Controller with 0.
The 5 to 3 HP pump has all non-magnetic liquid paths and lifetime corrosion warranty.
Professional cooling equipment includes a cooling system for extrusion bath.
Customization is also available
Engineering equipment and installation services. Oil-
Free, non-friction, central chiller (75-90 tons)
Based on the Danfoss turbocharged compressor.
It is said that the equipment is very quiet and low in terms of maintenance and energy.
Partial save-loaduse.
CRG logic
Central cooling system for extrusion plant.
Delta Cooling Tower Limited
Complete product for manufacturing engineering plastic corrosion
Anti-cooling towers ranging from 10 tons to 2000.
The tower includes an efficient counter
Flow design, carry 15-
Annual warranty on the package, it is molded into a uniform leeks-Proof structure.
All models are factory assembled, simple to install and can be maintained almostfree.
The cooling system of the package can slide
Installation complete a project including pump, heat exchanger, storage tank, control panel and other items.
Pioneer air strip from 1 to 5 packing columnsft-diam.
5-above column and custom designft-diam.
Pre-integrated packageAssembly, non-slipmounted, pre-piped and pre-
Wired including process control.
Delta T systemsWater-
Cycle temperature-
The control system adopts a horizontal pump to extend the sealing life, and the copper sleeve heater elements maximize the heat transfer.
Unit to order-or multiple-
Regional configuration that runs to 300 F and meets film standards-1 Specification.
Customized design is available.
KB upright series comes standard 9-
Kw heating element;
Fully programmable, microprocessor
Digital controller based on PID
And the impact capacity from 0. 75 to 5 hp.
SB series 4. 5-and 9-
Kw heater and l/2-
HP motor is suitable for smaller forming machines. Oil-
The looping system runs to 400 F or 550 F. Unitsoffer low-watt-
Density, heater element of steel sheath; long-
Long-lasting, positive-displacement, mechanical-sealed pumps;
Fully programmable microprocessor
Digital controller based on PID.
Heater size of 6 kw andup, pumping capacity of 10 gpm and above, and single-and dual-
Regional economy. Built to NEMA-1 or NEMA-12 electrics.
Edwards EngineeringCF-
1/2 series liquid chillersto 60-ton water-cooled andair-
Cooling unit with colored coolant loop, reservoir and circulating pump, electronic operating temperature control [+or -]1[degrees]
F precision and digital display.
All are pre-packed and installed in a cabinet with casters.
Additional liquid coolers are provided through 240 tons. Air-orwater-
Large stainless steel cooling unit
Steel reservoir, and awalk-
In the waterproof case, from 0-Double 100%-
Arrangement and damage of the pump-
Evaporator-resistant design.
The Chiller has automatic air cancellation, automatic head-
Outdoor air pressure control-
Cooling model, single central control panel, multiple indicator meters and closed water system.
Installed indoors or outdoors, fully pre-prepared and pre-wired and factory tested. EUROTHERM INC.
Full line controller for mold and auxiliary equipment cooling. New 3216 singleloop liquid-
Temperature Controller 90mm deep, text display, easy to configure, high input accuracy, 5
The board process formula with 48 parameters/formula and the company\'s spatula instant precision system.
Ordering, configuring, and maintaining code that has been simplified to fully specify functionality and configuration.
The 3216 features include universal input, universal power supply, the ability to download a custom input curve, digital communication, a protection level of 65, and the availability of current transformer inputs used to monitor load current.
The new version of the company\'s iTools small graphics configuration software allows the controller to be configured without connecting the controller to the power supply.
Full installation of cooling tower or chilled water in EVAPCO Canada-coolingsystems.
Dedicated to cooling tower replacement and reconstruction, pumping station and chilled water-storage tanks.
Parts and services for cooling towers and pumps.
Services include preventive maintenance programs. FASTI USA, INC.
Blow air cooler (BAC)
It is an air cooler that is used with specially designed blow pins or needles to increase the productivity of extrusion blow molding by up to 50%.
Products and air molded by this process-
31 f when the external mold performs the same work, heat is removed from the inside, resulting in parts with less deformation and internal stress.
Blow molding booster (BMB)
Is a smaller version that provides 32 F of cold air to about 15-
The productivity of the blow molding process increased by 20% and was designed for smaller parts such as bottles.
Air Cooler (ACe)
Supply air at a constant temperature of about 37 F, cool the blowing film and film extrusion, and guarantee an increase of 25% or more.
Regardless of the ambient temperature, the temperature and flow rate are controlled to keep the process constant.
Preferred for portable chillers
Manufacturing aviation-and water-
Cooled portable chiller, plantwideremote condenser air-and water-
Cooling chiller for pump system with spare pump.
In addition, modular chillers for full plant cooling have been easily expanded without shutting down existing systems.
Anair is also available-
Cooling cooler for single film line and air cooling coil unit for full factory cooling system for multi film line.
Supply cooling-
The tower system is equipped with a cooling tower, a pump tank system with spare pumps, an automatic chemical treatment package with a filtration system for on-line and bypass filtration of manual and automatic purification systems.
Most important machine manufacturer companyAir-and water-
Portable chiller for indoor and outdoor air cooling-and water-
Cooling central chillers, cooling towers and chemical treatment packs, pumps-
Tank Group with spare pump, discharge head, filtration system and central control and alarm panel options.
Freeze co Systems Ltd.
Supply Central and portable chillers from 1-to 400-
Including compact, low level tonscapacity
Cost model of 40 to 80 tons. Water and oil-
Temperature Controller with different heating capacity and cycle capacity.
FRIGEL North America new branch of Italian company supplies micro gel water
Built-in cooling portablechalers
Heating capacity (6 to 48 kw)
For a temperature range of 20 to 195 E, automatic \"free cooling\" when no heating or cooling is required to modify the process of entry \"-
Water temperature.
Vacuum automatic die arrangement.
Hot gel pressurized hot water temperature is also provided-
Special control algorithms for up to 350 E and control of electric gates (
Not on/off solenoid)
It is reported that faster heating is allowedup.
In addition, in the absence of a cooling tower or a central cooler, an eco-drying system for central cooling is also provided.
For automatic bypass of high ambient temperature and cold weather, use \"free cooling\" of special insulation mode \".
H20 engineering water system company provides molds-
Temperature controllers, Coolers, Cooling Towers and filtration systems that increase productivity through reliable and energy-saving-
Efficient performance.
Hamilton AVTECDirect-or indirect-cooling liquid-
Temperature Controller for pumping dimensions from 1/2 to 3hp and 3-
12 kw heating, solid-
State or microprocessor control.
Portable air Series 2000or water-
Cooling chillers from 2 tons to 35 tons include:
Rated parts, solid-
Half-State temperature controller
Sealing compressor and hot compressorgas bypass. Also process-
Water system including central chiller, water pump tank and cooling tower. Heat-
Recycle the system to recover the process heat and use it in winter to replenish the plant heat.
IMS company circulation machine for mold
Simple temperature control-to-
Read Gaode and simple service access for all components. Closed-circuit hot-
Stainless steel for water circulationsteel tanks.
The positive/negative pressure re-circulator can also prevent the line from leaking. Air-
The cooled TrueMold controller is completely its owncontained. Oil-
The maximum operating temperature of the heating circulator is 550 F. Open-
The P75 loop provides fast and accurate temperature control. TrueTon air-
Cold chiller of 0.
5 to 30 tons need the least maintenance, and it is its owncontained.
Other sizes and water
Cooling unit-to-order.
Koolant koolers, INC. A DOVER CO.
Standard, custom and OEM Industrial chillers for indoor and outdoor applications, including modular central cooling systems with waterorair-
Cooling the condenser.
Capacity from 1700 to 8.
4 million Btu/hr when 65F leaves the fluid temperature and 95 F ambient air. Closed-
Loop models for cooling molds, heat exchangers, jacket tanks, hydraulic fluids, Transformers and scr.
Features include sealing, half
Air-tight, rolling or screw compressors;
An airtight pressurized or atmospheric reservoir;
Automatic water making-up;
Immersion coil, brazing-plate, plate-and-Frame and shell-and-
Tube heat exchanger.
KR Products Co. , Ltd.
Circulating chiller board-
Type R heat exchanger22refrigerant.
1-units providedto 10-
Tons of capacity and packaging or remote systems. Microprocessor-
Control, the system has been established-
Bypass valve, high
Pressure pump, non-corrosive storage tank, free protection and low
Environmental Control. L-
Supply Central and portable chillers (both air-and water-cooled)as well as oil-and hot-
Water temperature controller, negative-
Cooling tower, water pump-pressure unit
Water Tank Station, heat exchanger, water filter and water-
Processing system.
Series of cooling products (
Built by another United StatesS. supplier)
Portable air included
Cold chiller of 0.
25 to 30 tons of water
Cooling Unit of 2 to 40 tons.
The unit has a centrifugal pump (0. 24 to 10 hp)
Rolling or reciprocating compressors, brazing-
Plate evaporator, nonferrousresservoirs, stainless steel
Steel Cabinet and microprocessor control using spi communication protocol.
A pump tank of 250 to 5000 gal can also be provided with a pump capacity of 2 to 60 hp and a cooling tower quantity of 45 to 450 tons with non-fee construction, single or multiple batteries.
Hot Company
Water Unit of 0. 75 to 7.
For devices with temperatures up to 250 E, 5 hp and 6 to 48 kw have regulated cooling valves, stainless steel
Continuous display of steel cabinet, setting point and process temperature and SPI communication protocol. Hot-
The oil system from 12 to 48 kw is heated up to 500 F and the centrifugal pump is 1 to 7. 5 hp,stainless-
Steel Cabinet, low-watt-Density heater. THE LOGIC CORP. Negative-
Pressure leak plug and negative/positive-pressuremold-
Temperature Controller up to 400 FVac-U-
General Temperature-
Purpose temperature controller with negative-andpositive-
Pressure mode that can be used at the same time.
In addition to controlling the temperature, it can also prevent leakage, improve the quality of the parts and shorten the cycle time.
Use water and other heatConveying fluid.
The company has a patented process to discharge the formed gas into the fluid and transfer water between molds through any size of the core to cool the long and thin core.
Free Consultation on mold exhaust and cooling is provided. LOUIS P.
Batterson\'s full range of molds-
Temperature Controller, portable chiller, pump-
Tank Station and cooling tower system.
Easy to use and maintain for all equipment.
Function of \"plug\" system
There is only the capacity of NGOs with electricity and water connections.
Marley cooling technology provides a complete suite of cooling towers and air-
Cooling the condenser.
New products include the modulus tower, which can be installed quickly and easily from the factory
Assembly module;
New University of NC Tower
It is said that there are no basins for leakage and corrosion.
Matsui United States limited
The new GMC Series temperature controller provides accurate temperature control through PID microprocessor control.
Made of stainless steel and non-ferrous metals, it is durable.
Using a floating-free switching system, the GMC isolates itself from pressure and temperature fluctuations in the water supply system.
The heater elements are sheath and plated to prevent dirt and other harmful deposits.
The compact GMC unit has a small footprint and high energy efficiency.
Available 0. 4-, 0. 8-and 1. 3-hp pumps and 3-to 8-
Roll in water or oil.
Standard equipment includes alarm diagnosis with pressure bypass valve and solid, casters, manifold, stainless steel ball valve, outlet pressure gaugestate relays.
Circulating water and heat of MOKON-
Deliver fluid temperature control systems, portable and central chillers, pump tanks, cooling towers, maintenance products and customized solutions as per process requirements.
Circulating water temperature-
Temperature change up to 300 E Mokon Minitherm control system for small circulating water system-
Tonnage machines and laboratory applications for 2 or 4kw.
Stainless steel for hot water II compact portable isequipped circulating water system
The wet surface of the steel structure is related to the monthly kwheating capacity and the monthly gallon.
Mokon Duratherm circulating water system with non-corrosive structure, stainless steel pipes and heaters
Steel pump and horizontal brass heating chamber.
It can be heated from 9 to 96 kw and pumped from 25 to 120 gpm.
Single Available systemand dual-
Regional configuration and HTP design (
The temperature rises to 300 F and the pressure rises to 70 psi).
Duratherm NPS provides accurate temperature control at positive/negative pressure.
Circulating heat-
Transfer fluid temperature-
The control system with a temperature range of 650 F contains a cooled oil storage tank that eliminates the thermal shock associated with the internal temperature
Shell and tube heat exchanger.
In the same cabinet, there are up to three control areas and the capacity is raised to 60 gpm and 100 psi. Air-and water-
Portable chiller with cooling capacity from 0. 25 to 35 tons. Corrosion-
Free Building, stainless steel plumbing
Steel supply pump and evaporator, and heavy-duty-
Insulated plastic tank.
The combined heating/cooling unit provides temperature control from 20f to 250 F with a cooling capacity of up to 35 tons.
Central air conditioning system available-or water-
Single cooling designor multiple-
Circuit configuration, capacity from 30 tons to 120 tons.
An outdoor chiller of 10 to 500 tons is also provided, and the pump tank is made of stainless steel of various sizes with a pumping configuration to meet the processing needs.
There are two types of cooling towers that are made of strong galvanized steel or-of-the-
High Density Polyethylene from 10 tons of cooling capacity and art.
Maintenance products include Leakmaster negative-
Eliminate pressure systems for handling problems related to leakage; D-
Scalersystems for the removal of rust, scale and/or lime deposits;
And ClearFloheat-
Transfer Fluid and water-
The filtration system improves the efficiency of the heat transfer system and reduces the downtime and maintenance costs.
Professional custom temperature-
Control System and chiller. MOTAN, INC.
The company built the first cycle temperature controller in Switzerland in the name of Motemp.
Including hot water, pressurized-water, and hot-oil units. MOTIVAIR CORP.
Portable, compact, self-containedcontained, air-or water-
The \"circulating\" chiller for cooling and packaging ranges from 0. 5 to 50 tons (0. 5-to20-
Tons of stock units).
Large insulation included
Capacity tank, circulating pump, microprocessor control, remote start/stop, pump pressure gauge and full set of refrigeration meter.
The cycle concept is suitable for constant or variable cooling loads.
The operating cost is proportional to the percentage of capacity of the chiller used.
Central chiller (air-
Cooling, water cooling or splitsystem)
Between 70 tons and 270 tons.
Dual loop with screw compressor, PLC control and optional integrated Freedom-Cooling system (air-cooled only). Packagedwater-
Cool the chiller to 350 tons.
Nissin USA Ltd.
NHW series-
There are four types of water temperature controllers, which are pumps from 16 to 39 respectively.
6 gal/min and pressure from 58 psi to 94 psi according to model.
The unit works at temperatures up to 248 F with PIDcontrol, solid-
Direct-state relay
Cooling loop design, simplified control panel.
Norwell plastic Co. , Ltd.
Supply China-
Refrigeration Equipment and molds
Temperature Controller.
Ogden Manufacturing CompanyStock and pre-
Engineering low temperature CMX mold-
The temperature control system ensures accurate and compact control of the water temperature from 50 to 250 degrees, which consists of three main components: * Custom-
The casting heating/cooling chamber assembly has two chambers with integrated water temperature control function. Corrosion-
The resistor sheath element provides thermal input for 24kw. Open-andclosed-
Cycle cooling options. * High-
Performance, vertical mounting centrifugal pump with flow from 30 to 80 gpm.
The pump shell flange provides almost seamless coupling with a heating/cooling chamber. * Touch-
2104 digital microprocessor for panel operation console-
Temperature controller based on individual PID algorithm for heating/cooling mode, as well as dual set point and process Display for monitoring-and-
From the process pressure, plus the pump switch and diagnostic indicators.
Modular hydraulic (
Heat pump/Chamber)and fastener-
The free cable TV provides you with convenient service and reduces downtime.
Omega Engineering Limited
Omega Technology Limited
Provide continuous
Temperature circulating bathtubs, as well as a full set of sensors, instruments and hardware accessories for monitoring and controlling waterand oil-
Loop system. OPTI TEMP INC.
Opti temperature combination mold-
Temperature Controller/chiller for full-
Electric injection molding machine.
Patented refrigeration circuit allows from 40-
190 F, from zero to full load.
The unit is both a chiller and a mold-
The temperature controller in a single small cabinet, can be used as a cooler when running a cold mold on the machine, or as a mold
Temperature Controller for hot mold running.
The equipment does not require an external source of cold water.
Plastic Processing Equipment Co. , Ltd.
Budget supply Limited
Improved mold fluid
Temperature Controller heated to 250 F by touch
Panel keyboard and digital reading for easier setting and more precise control of [temperature]+ or -]1[degrees]F.
Designed for continuous use.
Institute of Technology
Preston industries
Liquid Cooler and constant-
Temperature equipment.
A chiller with a variety of cooling capacity, there are a variety of pumps to choose from. Temperature-
Control equipment for process applications and small devices
Laboratory of scale and quality
Control requirements.
From basic analog control to controller options for programmable controllers, it is possible to provide an ofrsdorf interface for complex time/temperature analysis.
Protection cooling tower companyLow-
Corrosion of maintenance cooling tower-
Resistant parts.
Basin, Shell and inlet blinds are long-
Fiberglass-
Reinforced plastic.
Gelcoat protects fiberglass from UV rays. Round, bottle-
The cooling tower operates at a rather low horsepower.
Components from 3 tons to 1000 tons were knocked down.
Opc systems, LLC production Heat-water and oil-
Cycle mold
Temperature Controller, negative-
Pressure system.
QPC is OEM in USA. S.
Heating element company
Elements used with waterand oil-
There are circulating temperature control devices in stock.
The company establishes fluid-
Heating system and heater tank. REGLOPLAS CORP. Water-and oil-
Temperature control unit (
Water to 320 F, oil to 660 F).
Support units in the United States. S. through wholly-
Owns a Swiss subsidiary.
Various models and options allow tighband control applications and interfaces to be configured for almost all presses.
North American company of remarkHot-
Depending on the model, the operating temperature of the water and oil temperature controller and Chiller is up to 428 F.
The device usually has a digital display of the set value and the actual value, as well as the monitoring of heat by the safety thermostat.
In the case of 44 psi to 37, the throughput range ranges from about 10 gal/min.
5 gal/minat 102 psi.
Riddle Corporation of America
German-based liquid cooler manufacturers
Technology Applications in laser systems, medical applications and machine tool industries.
The product is based on the standard series of process cooler. RITE-TEMP MFG. INC.
Four designed refrigerated chillers of 2 to 36 tons. Air-and water-
Cooling unit standard is 40-gal, stainless-
Steel, airtight tank.
Portable equipment, indicating instruments, indoor or outdoor installation and user-
Friendly control.
Special controls, meters, or electrical options are available.
Shi Lai Bell Co. , Ltd. Air-and water-
Cold fan from 0.
Water systems of 5 to 20 tons are designed for unrestricted circulation and appropriate turbulence in heat exchangers.
No need for antifreeze. Extra-
Large, stainless steelSteel depot;
Taikang compressor;
Long life polyester powder coating
Traditional accessories, parts and motors that are easy to replace.
All units have tilt control panels that loop on/off as needed, useno hot-
Gas bypass, contaminated-free stainless-
Water pump in steel or bronze. SHINI USA Hot-water and hot-oil systems; negative-pressure hot-oil andhot-water systems; air-and water-
Portable refrigeration
Central chiller; cooling towers;
Pump Tank Group. Hot-
Water Unit in steam or electric heating directly or off-
In single-zone and multi-zone configurations, cycle cooling, portable or stationary from 50-300 F. Hot-
Portable or stationary oil unit with single and multi-zone configurations ranging from 350,450, 550 or 650 F. Negative-pressurehot-oil or hot-
The water unit contains an on-
Plate vacuum pump can produce controlled and reliable negative pressure.
The design allows to adjust the negative pressure as needed.
The mold can be removed from all hot oil or hot water before replacement. Negative-
The pressure unit can be filled from a fluid source using a vacuum pump. Air-and water-
Portable and self-cooled chillers
It is equipped with 3 to 80 tons of refrigeration and water pipes.
Double central chiller
Refrigeration circuit for component protection, easy-to-use components and complete unit frame.
The two air ranges from 5 tons to 400 tons. and water-cooled systems.
The cooling tower is constructed of standard galvanized and FRP from 10 to 400 tons. Pump-
Water tank assemblies that adjust the size according to the flow requirements of each cooler or cooling tower.
Features include a tank cover, electronic housing and alarms for pre-wiring, and optional spare pumps and custom configurations.
Single temperature controlSupplies air-and water-
Portable and centralized cooling chiller with cooling capacity from 1-
58 kw, pump capacity 27-400liter/min. Water-
Turn off cooling mode
The loop to prevent circulating water pollution.
A closed water heating/cooling system is also available
Circulating water cooling, air-or water-
Temperature range of 50 to 194 F, pump capacity of 60 to 400 L/min.
Pressurized heat-
It is said that the water unit provides temperatures up to 400 degrees Fahrenheit, superior to the use of hot oil in terms of cost and safety.
The company also provides heat
Oil units up to 662 F with a heat capacity of 3 to 144 and a pump capacity of 45 to 1080 liters/rain.
Some models have magnetic suction pumps.
Star automation
SKA provided by the company-
Compact mold production line-
Built-in temperature controllerin air-
Cooling coolers with temperatures ranging from 40 to 200 E are also suitable for portable molds
Temperature controllers of up to 248 F in models 3 to 9 kw.
Two lines are not circulatingcorrosive, non-
Rusty Star BrineSII coolant.
The STW wire is indirectly cooled by an overheating exchanger.
Star Automation also offers independent chillers. STERLING Water-and oil-
Cycle temperature-
Control system for standard and high level
The temperature application of the 650 E portable and central cooling system is from 0. 5 to 200 tons.
The compressor and control technology of the chiller matches the application.
Cooling towers, reservoirs and pumping systems, water filtration and handling equipment are available.
The company offers a full range of compact temperature control units ranging from 0 to 9 and 12 kw heaters and pumps. 75 to 5 hp.
Many models feature a simplified internal casting or colored fluid circuit with 40% reduction in connection and 80% reduction in mechanical parts compared to conventional designs.
The simplified design provides a balanced flow rate with a lower pressure drop.
Most of the company\'s temperature control units use M2B fuzzy logic control to provide adaptive adjustment to the process.
Meet the new NEC electrical standards. Water-
The temperature control unit provides a water supply temperature to300 E heater with a size of 48kw; pumps from 0. 75 to 7. 5 hp. Single-, dual-and three-
The regional unit can provide a public power supply and a water supply connection.
Colored construction and various control and computer
Interface options available. Air-and water-
Cooling portable chillers from 0.
5 to 30 HP uses a single pump and a double pump to supply chilled water from 0f to 70f at various flow rates and pressures.
Control accuracy of PID self-tuning microprocessor on [+ or -]1 [degrees]
Rolling compressors are used in many models to reduce operating costs. Air-and water-
In addition to a comprehensive system design and installation service, a cooling central refrigeration system is provided.
Staging and unloading of units featurecapacity.
The central cooling station includes storage tanks, refrigeration, control systems and pumping systems, with a small footprint and low installation costs.
Metal cooling towers of 10 to 632 tons and fiberglass installations of 50 to 200 tons.
Equipment, chemicals and test items provided. TECHNE INC.
Circular bath system for the above open and closed applications
The ambient temperature can reach up to 250 °c.
Five bath capacity and five temperatures from 8 to 48 liters-
The 25 systems provided by the company consist of controlled circulation machines.
Each can be used as an open-ended bathtub that provides the maximum working area, or as a closed-loop system for external equipment.
The inlet and outlet pipes at the rear of the Circulator can be used for external circulation or for circulation only inside the bathtub.
Although designed mainly for heating applications, the bathroom is sealed at temperatures below ambient temperature and can be used at temperatures below ambient temperature
Ambient temperature. TEMPEST INC.
Supply portable airand water-
Air cooling chiller
Cooling central chiller, pump/water tank unit, cooling tower and heat-
Water and oil temperature controller. TEMPTEK, INC. Mold-
Temperature Controller, portable chiller, pump-
And cooling-
The tower battery is designed for the convenience of mechanical simple andoperator.
Strong construction and fewercomponents.
Temperature controller provided in water and hot wateroil, open-andclosed-
Loop configuration.
Oil-water unit controlled to 250 F
Circulation device to 400 E space-
High efficiency equipment
Flowpumps, flange heaters and advanced electronic instruments with remote functions.
Portable chillers and refrigeration modules are available in the airandwater-
Condensed version.
Unit of 1 to 30 tons with operating temperature of 30 to 70 degrees Fahrenheit
The operating temperature is from 20 to 60 degrees Fahrenheit and the cooling module is from 5 tons to 40 tons. Pump-
The water tank station utilizes a minimum floor area while emphasizing the vertical size of the stored water.
Standard process connections for all pumps, sensors, drains and water in the company
Level control simplifies installation.
10 to 540 tons of galvanized metal or fiberglass cooling tower energy-
Efficient prop fan, spacious wet deck and large reservoir.
Thermal care
Portable chiller with its owncontained air-cooled, water-
Cooling or remote condenser units from one ton to 60 tons have dual-
Digital Display, lifetime warranty, seven front-
Action switch and 19 diagnostic lights.
Central chillers in three configurations: systems in the range of TS Series economic plants, including 20 to 100 tons, with rolling compressors and two separate refrigeration circuits for precise control;
TX series-and dual-
The circuit unit of the screw compressor ranges from 40 tons to more than 440 tons;
And TC seriesand dual-
Circuit unit of 60 to 180 tons centrifugal compressor with advanced technology.
The TC model does not provide a non-friction magnetic bearing with abnormal quiet and energy
Save performance.
PLC touch screen is standard for all central chillers. Air-cooled, low-
The capacity of environmental outdoor equipment can reach 490 tons.
The fiberglass cooling towers of the FC and FT series range from 22 tons to 240 tons.
The unit has a high-
Efficiency induction
Draft design and solid, lightweight, non-corrosive FRP housing.
Construction of five nonferrous metals
Total Tower warranty year (Including motor)and 10-
The housing warranty for these two series.
Customize the pump/reservoir assembly of any size and configuration for tower or chiller applications.
Glass fiber, PE, stainless steel and other productsSteel, ordouble-
Welded steel structure with solid pump plate and pre-installed pre-wired control panel. Water-
The treatment system controls scale, corrosion, suspended solids and microbial growth through a single panel-mounted unit.
The filter equipment includes sand media filter, bag filter, turbine disc filter and filter. Temperature-
The control unit for the full range of pumping, heating and cooling configurations of oil and water is from 0.
75 to 10 hp, 9 to 60 kW.
Dual tank and pump assembly, microprocessor with dual digital display and five-
7 years warranty-
Action switch and 15 diagnostic lights.
Negative pressure units are available.
Thermal Science material representation Circulator line consists of Haake and Neslab bathroom Circulator, cycle cooler, heat exchanger, immersion cooler and low temperature thermostat covering temperature from-90[degrees]C to 300[degrees]C.
Water and hot water-
Oil temperature controller and portable chiller.
Water unit with upright, low water level
Configuration file and subcompact configuration.
The microprocessor control has the functions of rs23 c, RS422 and RS485.
The horizontal pump with sealed Flushing is easy to operate. Single-
A multi-region model with optional features. Hot-
The oil system controls the temperature from 100 to 550 from 6kw and above.
Water-
Standard cooling seals.
Upright and compact models are available.
Portable chiller with airand water-
Cooling condensation from 1 ton to 25 tons. Hot-
Stainless steel gas bypass
Fully insulated liquid storage tank steel or non-ferrous metal-
Copper pipe and freezestat control.
Van steenburgh liquid cooler Co. , Ltd. Chil-
The Trak series is a reciprocating liquid chiller from 2 to 7.
5 tonswith remote condenser discharge heat outdoors and/or recover heat used elsewhere.
Head Start receiver in all sizes, it matches the load to ensure smooth, consistent operation and low loadambient-
Temperature start-up.
Front panel channel for all parts of the system valve. W. Z.
International professional playerINC. Supplies air-and water-
Cooling chillers from 2 units. 5 to 19. 8 tons andhot-
Water or oil mold-
The temperature controller is all manufactured by Ningbo Huarui machinery. Co. Ltd. in China. WITTMANN, INC.
Full hot line
Water temperature controller: Tempro Basic, Direct and Plus models up to 320 F, oil unit up to 500 E Plus, single-or dual-
Open system with submersible pump and no pump seal (
Unsealed maintenance)
Or use a magnetic coupling pump without a pump seal as an extension system.
Full service Tempro Plus Unit C
Color LED display with customizable.
Other standard features include automatic pump phase, digital pressure reading, and solids-
Status relay with optional ultrasonic flow measurement and machine interface. High-
Pressure regeneration turbinepumps offers up to 100 psi.
Operating temperature range from 200 F to 320 E single
The circuit Tempro base unit can work up to 200F, 285 F or 300 F depending on the model.
There are 100% non-units in all units
Power cord, Y filter and main power switch are included.
Mold cleaning and negative pressure (leakstop)
It is also standard in most units.