What are the common bad phenomena in the production of fluorine rubber seals?

What are the common undesirable phenomena in the production of fluorine rubber seals?

For the fluorine rubber rod seal ring, it can be said that most products do not have strict requirements on it. The different problems of the product are basically no problem as long as they can be used normally. However, as a fluorine rubber supplier, you still need to be quality-oriented. Service is upright. Regardless of whether the quality requirements of silicone rubber gasket products are strict or lax, corresponding preventive phenomena need to be taken. The following is to talk about the bad problems of fluorine rubber sealing ring manufacturers.

The phenomenon of unfamiliar fluorine rubber seals is a very common phenomenon. Everyone knows that small fluorine rubber rings are basically not profitable. They can only achieve corresponding profits by running volume. Because fluorine rubber ring manufacturers need to produce Improve the efficiency, so when the speed of the mold is increased, the ejection time is increased, and the unfamiliar and soft phenomenon is naturally reflected, which will cause the product to deform and reduce the service life.

The burr of the fluorine rubber rod seal ring is too large, and most of the small fluorine rubber products have a large number of mold holes, which can be directly demolded in a whole mold. Therefore, the burr of the fluorine rubber ring has become a problem. For this phenomenon, most manufacturers When removing the edges, you will choose to use an edger or frozen trimming, and this will also produce a certain amount of burrs. When trimming becomes a problem, this problem still needs to be dealt with from the mold. Good mold steel will be combined after long-term use. Only when the mold line is lossless can the product's burrs have no effect.

The material problem of fluorine rubber seals. Many fluorine rubber seals do not have the ability to rebound and pull up. In addition to the time control of the manufacturer, there are also very important factors in the material. At present, the sealing fluorine in many machinery industries The rubber ring still does not deform under the condition of long-term force extrusion, then it means that it uses high-detailed silicon chain raw materials in the material, so the choice is naturally very important. In addition, the fluorine rubber ring mainly depends on the product. Function performance, such as waterproof or cushioning shock absorption, sealing and temperature resistance, etc., can be selected for different processes and different processing methods for different uses.

I hope the above content can help you better understand the fluorine rubber seals. If there is anything you don’t know, you can directly communicate with our customer service. We will serve you wholeheartedly and thank you for watching.

need huge investment, so it is important to shop with caution.

Energetic, optimistic entrepreneurs often tend to believe that sales growth will take care of everything, that Dms Seals Technology Co.,limited will be able to fund our own growth by generating profits.

Dms Seals Technology Co.,limited will give you a suitable price for purchasing seal manufacturers.

Dms Seals Technology Co.,limited has never conceded on the quality and the services of the products which provided to the customer.

We want to be careful and deliberate about developing DMS Seals, from the platform we choose, to the way we approach it, to the methods we use.